White Ridged Slats® for 6ft Chain Link will also be added to existing chain link fence to enhance privacy, security, and aesthetics. Slats are economical and easy To put in. Each and every box incorporates 82 slats and 10 feet of Viper ChannelTM – enough to hide 10 linear feet of six foot tall chainlink fence. Each and every individual slat measures 1.25 inches wide and will also be installed in 11.5, 11, or 9 gauge chain link fabric with a diamond pattern ranging from 2 to 2.375 inches. Slats are approximately 68.5 inches long (3.5 inches shorter than the entire height of the chain link fence to facilitate installation). It’s the owner’s responsibility to make sure your fence will resist the wind load of adding slats. To put in, simply slide the Viper ChannelTM horizontally into the ground of the primary fully enclosed diamond of chain link (see details in pictures) after which slide Each and every slat vertically during the diamonds of the chain link until it clicks into place. Take care to stand Each and every slat the similar direction. DO NOT WEAVE out and in of the chain link. Chain link is woven in a way that leaves a space for the slat to slip down during the fence. Damaged or bent chain link fence might want to be repaired to facilitate slat installation. See pictures for privacy achieved in common chain link sizes. The volume of privacy achieved varies depending at the size of the diamond of the chain link used. The dimensions of the chain link diamond is the space measured between two parallel wires within the diamond weave (not corner to corner). Two inch diamond requires approximately 82 slats each and every 10 feet providing 85 percent coverage (1.25″ x 82 ÷ 120″ = 85.4%). Economy chain link with a 2.375″ diamond requires approximately 74 slats each and every 10 feet providing 75% coverage (1.25″ x 74 ÷ 120″ = 77.1%). Chain link fabric with a diamond pattern larger than two inches will use fewer slats than provided in Each and every unit. Viper Channel is available to buy to make use of with extra slats.
Add privacy and curb appeal for your existing chain link fence
Designed for 6ft 11.5, 11, or 9 gauge chain link with 2 to two-3/8 inch diamond (see detailed description)
Each and every unit incorporates 82 slats and 10 feet of bottom locking channel to hide 10 linear feet of fence
Made in the united states from virgin High Density Polyethylene and UV inhibitors
Limited 30 year warranty